Drag Racing Baseball T-Shirts

This design includes a large Bee Line Dragway imprint on the back and a small AHRA logo on the front making it twice as cool! On July 20, 1963, ground was broken for a drag strip to be built on the Salt River Indian Reservation in what was then a pretty rural area in Scottsdale, Arizona. Jim Rodgers, national 1962 C/S drag champ, built the track on eighty acres of land leased for ten years from the Salt River Pima Indian tribe. Directions to the track were given as being four miles north of the McDowell Road on Arizona Highway 87. It was a 60-foot wide quarter-mile asphalt strip, with seating for 2,000 people, and a pit area to accommodate 300 cars. It opened for every-week Sunday racing on October 6, 1963, under AHRA sanction.

a little Modesto, a little Pasadena ,a touch San Demas, drag racing , hot rods in the summer sun.

This Pennsylvania-based performance legend started out as a maker of motor mounts for engine swaps and floor-shifters back in 1958, but they steadily expanded their product line through the 1960s. Hurst wheels, Line/Loc, and Swifter Shifter gloves were developed among other items, and later, Airheart Brakes and the Schiefer Manufacturing Company, which made clutches and other driveline components, were acquired. Hurst Performance floor-shifters were skillfully engineered, reliable and stirring in appearance, plus, their marketing was in tune with the times, catering to the flourishing muscle car movement of the 1960s. Their shifters infiltrated the drag racing, stock car racing, off-road racing and many other areas of motorsports.

Hurst Hemi Under Glass is the name given to a series of exhibition drag racing cars campaigned by Hurst Performance between 1965 and 1975. Each wheelstander was based on the current Plymouth Barracuda for the corresponding model year. The car was so named because the fuel injected Chrysler Hemi engine was placed under the Barracuda's exceptionally large rear window. The result of the rearward weight transfer was a "wheelie" down the length of the drag strip. The Hemi Under Glass was developed by Hurst Corporation to showcase their products in the A/FX class - precursor to funny cars. In 1965, George Hurst hired Wild Bill Shrewsberry of Mansfield, OH, an accomplished drag racer who had raced for both Mickey Thompson and Jack Crissman.

Drag racing is my antidepressant was inspired by my parents, they were racecar drivers when I was a child and we traveled the Country going from race to race, my parents always said car racing was their antidepressant

The original racing slicks for drag racing and other applications were simply recaps of varying quality, but in 1952 things changed when purpose-built, first-run drag slicks were produced, changing the game and upping performance for decades to come.

Drag Racing Makes Me Happy

Drag Racing in 1960s

Foulger was a Blue Oval dealership on Huntington Drive in Monrovia, California and was one of the first dealerships to dive headfirst into drag racing, sponsoring several drag cars in the '60s and '70s. Their racing logo definitely reflected the times and their top competitors, most notably the 440 powered Plymouth Roadrunners.

Drag Racing

Midwest Auto Specialties was an early mail order speed equipment merchant. Based in Cleveland Ohio, with a branch in Indianapolis in 1967 and multiple retail stores throughout Ohio, they shipped nationwide. They carried an unbelievable selection of speed equipment and custom car parts making them a true hot rodders resource. The emphasis was on racing and street performance, but especially drag racing. Shifters, intake manifolds, exhaust headers, ignition systems, adapters, camshafts from many manufacturers plus racing steering, and dragster wheels They carried it all and for most people who wanted to soup up their car, they simply couldn't get these items locally, so Midwest Auto Specialties hooked them up by mail!

Keith Black was an American producer of high-performance drag racing engines. Black first made a name for himself in the mid-1940s in boat racing when he set a world record in his second time out at the Salton Sea running one of his first performance engines. He opened Keith Black Racing Engines in 1959 and by 1961 his boat racing exploits included nearly 50 international and national records. Drag racing teams took notice and Black’s builds for the drag strip became one of the winningest engines in the NHRA in the ’60s and his aluminum engine blocks would dominate the market throughout the ’70s. The engines Keith Black produced were based on the Chrysler 426 Hemi, Chevy Big Block, and Oldsmobile Big Block designs.

drag racing

More American Graffiti is set over the course of four New Year's Eve holidays beginning in 1964 and tells four separate stories, one of which is that of John Milner, the head honcho of the racing scene in the first film, as his drag racing career advances. John's story follows him and the Milner Racing Team crew through a series of personal and professional ups and downs, culminating in a fatal finale. This Milner Racing Team design is a replica based on a screen used tee, ensuring it's accurate to those seen in the film.

Drag racing

F'n Wookee Studios has always been apart of the Drag Racing scene. Scoobe has brought a little piece of nostalgia to a closet near you!

By the '50s, drag racing was becoming more organized, largely due to the efforts of the American Hot Rod Association. Dirt fields sprouted bleachers and concession stands, and then beautiful paved tracks with safety fences and elaborate pit areas as drag racing became big business. Being a racing-crazy state, Indiana was not immune to this, and so a famous track was born in 1954 in Hobart, Indiana, just east of I-65 on the north side of US 30. For tourism purposes and making it easier for folks to find, the track was said to be in the much larger city of Gary, Indiana which was just a few miles north of Hobart. The track became a favorite for fans and drivers alike and quickly became known as the place "where the great ones run."

drag racing

In 1923, George Wight opened an auto parts yard on Gage Avenue in Bell, California. The shop was a combination of salvage yard and machine shop, and it catered to the race crowd in the early days of dry lakes racing. George began removing speed equipment from the junkers he bought. George sold the speed equipment separately under what eventually became Bell Auto Parts. Bell Auto Parts is one of the first, if not the first, speed shop in the United States and it didn't take long before it was the center of racing and rodding activities for the greater Los Angeles area.

While organized drag racing came about in 1951, it was in the early '60s that the big three started paying attention. Detroit began quietly building stock-looking cars stuffed full of high-performance parts and no factory warranty, aimed squarely at taking drag strips by storm. With this new breed of off the lot drag racers, increasing numbers of people were suddenly able to get into drag racing without having to build a car from scratch, and boy did they ever. Once the bug had bitten them, they were all in as drag nuts and their stock racers began the never-ending modification process that all hot rodders go through in pursuit of speed.

Super Stock & Drag Illustrated was founded by John "Monk" Reynolds, publisher of Eastern Drag News and owner of Pennsylvania's US30 drag strip. The first issue was November 1964 and the magazine published continuously until June 1996 when it was re-titled 'Drag Racing' and only made it a few more years until a final issue in March 1999. The magazine was a thoughtful mix of drag racing coverage, tech articles, and street machines, which gave it pretty diverse appeal to gear heads of all sorts.

Most longtime drag racing fans are familiar with the ultra-swoopy Wonder Wagon Vega that he debuted at the 1973 U.S. Nationals, and some may even remember that the sponsorship program actually began with a completely different team at the end of the 1972 season. The Wonder Wagon was one of the most popular funny cars ever fielded amongst fans, but it’s driver frequently stated that it was the most dangerous too, mainly due to the car’s aerodynamics, or lack thereof. Dangerous or not, the cars and the sponsor was something different, and these bread truck inspired wagons really resonated with race fans.

Awesome design for those who love Drag Racing. Thank you.

This Is My Drag Racing Shirt Auto Car Race

The 429 was NOT simply a 1 (or 2) cubic inch larger version of the blue oval 427 & 428 engines. It was a totally new engine from a different engine family. This design was a departure from the paradigm, utilizing thin-wall casting methods and a skirtless block to reduce weight. The Super Cobra Jet, rated at 375 HP, had a 4-bolt main block, a Holley 780 cfm 4BBL carburetor, and a larger mechanical camshaft. It was only available with a 3.91 or 4.30 rear axle ratio. In 1971, the CJ engine also used a 4-bolt main block. However, these engines were actually derated and produced power in the 440–460 HP range. This was done to deceive insurance companies (common practice in that era), so that buyers did not have to pay higher insurance rates.

Drag Racing Is My Therapy Funny Racing Cars

Hurst Drag Racing Shifters

The early days of drag racing were largely a run what you brung affair, but by 1954, the true dragster shape and form had emerged and was a refinement of the earlier “slingshot” concept. Built using haphazardly assembled tube steel pipes, these cars gained the nickname “rail jobs.” In 1956, Scotty Fenn decided it was time for a dragster chassis built of quality materials and welded by professionals. Scotty called his new company “Chassis Research, Inc.” and by 1957 he had produced the first pro built dragster chassis that would lead the way to an expansive line of chassis and components that would go on to make and break records throughout the drag racing world.

drag racing

Weber Speed Equipment started out in 1945 as Weber Tool Company, making some of the first aluminum performance fly wheels. As the company continued to expand their speed parts catalog with cams, clutches, and heads, becoming increasingly popular with hot rodders and racers alike, they changed their name to Weber Speed Equipment. Aside from making high quality, extreme high-performance parts, one of their biggest claims to fame was their 'blow up proof' guarantee on their flywheels, something that was a big draw to those pushing higher horsepower and revs in the early days of drag racing.

Hurst Drag Racer

Conceived in 1959 by the Smokers Car Club of Bakersfield as sort of an East vs. West challenge, the March Meet (aka United States Fuel and Gas Championships) became much more than that. Held at Famoso Bakersfield Raceway, the event's reputation as the most fierce outlaw drag race brought competitors from coast to coast. Winning the event gave a drag racer immediate caché as the race was that tough to win in its heyday.

Drag Racing

The early days of drag racing were largely a run what you brung affair, but by 1954, the true dragster shape and form had emerged and was a refinement of the earlier “slingshot” concept. Built using haphazardly assembled tube steel pipes, these cars gained the nickname “rail jobs.” In 1956, Both Scotty Fenn (on the west coast) and Pat Bilbow (on the east coast) decided it was time for a dragster chassis built of quality materials and welded by professionals. Scotty called his new company “Chassis Research, Inc.” and Pat retained his firm’s already established name, Lyndwood Welding Co. and by 1957, both had produced a pro built dragster chassis and both claimed to be the first, though depending on who you ask, that remains up for debate.

American drag racing

drag racing