Drag Strip Socks
Description: Stock car racer Robert Newton wanted to design a tire compound to gain an advantage against fellow racers. This was done by retreading street tires in order to obtain a compound that would adequately gain enough traction. Using an abandoned barn in his home state of Indiana to start his business, he began sales to local racers, making him the first producer of specialty tires for competition use.
Description: Oswego Drag Raceway opened in Illinois in 1955 as one of the first purpose-built drag strips in the country. Most drag strips were built on abandoned runways, but Oswego was built from scratch by Dan and Wally Smith. The brothers had inherited the farmland it sat on from their parents. The Oswego Dragway became a go-to hangout for the youth in the greater Chicago area, but increasingly fierce competition made it much more than a hangout for diehard racers. The Oswego Drag Raceway operated until 1979 and the remnants of the drag strip can still be seen from Route 34, west of Oswego if you know where to look as you pass by.
Description: Carlsbad Raceway was a motorsport facility located in Carlsbad, California that featured a ¼ mile drag strip and motocross track, which first opened in 1964. The track was popular with local street racers as it hosted Saturday afternoon grudge races where drivers could square off against their friends (and enemies) in a classic 'run what you brung' event. Motorsports activities were shut down in August 2004 and a business park was erected on the land once occupied by the raceway.
Description: Stock car racer Robert Newton wanted to design a tire compound to gain an advantage against fellow racers. This was done by retreading street tires in order to obtain a compound that would adequately gain enough traction. Using an abandoned barn in his home state of Indiana to start his business, he began sales to local racers, making him the first producer of specialty tires for competition use.
Description: Like many early drag strips, Deer Park began life as an airfield and as post-war America went crazy for drag racing, runways previously used by the military during the war effort were the perfect place to scratch that itch. After opening in 1953, it wasn’t very long before Deer Park Drag Strip was the straight line scene’s place to be in the Spokane, Washington area. The track’s history was interesting and varied, and like all drag strips, there were plenty of great and not-so-great things about the place over the years. As drivers started pushing the limits of the speeds the track could safely support, construction began on a more modern track facility, Spokane Raceway Park, ending the nearly 20-year run of Deer Park Drag Strip.
Description: Like many early drag strips, Deer Park began life as an airfield and as post-war America went crazy for drag racing, runways previously used by the military during the war effort were the perfect place to scratch that itch. After opening in 1953, it wasn’t very long before Deer Park Drag Strip was the straight line scene’s place to be in the Spokane, Washington area. The track’s history was interesting and varied, and like all drag strips, there were plenty of great and not-so-great things about the place over the years. As drivers started pushing the limits of the speeds the track could safely support, construction began on a more modern track facility, Spokane Raceway Park, ending the nearly 20-year run of Deer Park Drag Strip.
Description: While iconic muscle-era dealerships like **Yenko**, **Nickey**, **Grand Spaulding Dodge**, and **Royal Pontiac** built “supercars” by stuffing factory chassis with tuned engines, **Baldwin Chevrolet** of **Baldwin, New York (Long Island)**, took a radical approach. Partnering with **Joel Rosen’s Motion Performance** speed shop (also in Baldwin), they transformed stock Chevys into **street-legal, turn-key drag monsters**—many flaunting optional wild **fiberglass body kits**—blurring the line between showroom stock and full-race beasts.
Description: While organized drag racing came about in 1951, it was in the early '60s that the big three started paying attention. Detroit began quietly building stock-looking cars stuffed full of high-performance parts and no factory warranty, aimed squarely at taking drag strips by storm. With this new breed of off the lot drag racers, increasing numbers of people were suddenly able to get into drag racing without having to build a car from scratch, and boy did they ever. Once the bug had bitten them, they were all in as drag nuts and their stock racers began the never-ending modification process that all hot rodders go through in pursuit of speed.
Description: Super Stock & Drag Illustrated was founded by John "Monk" Reynolds, publisher of Eastern Drag News and owner of Pennsylvania's US30 drag strip. The first issue was November 1964 and the magazine published continuously until June 1996 when it was re-titled 'Drag Racing' and only made it a few more years until a final issue in March 1999. The magazine was a thoughtful mix of drag racing coverage, tech articles, and street machines, which gave it pretty diverse appeal to gear heads of all sorts.
Description: Founded in 1964 in Columbus, Ohio, Nationwise was a chain of auto parts stores in the United States. In 1974, Nationwise partnered with Columbus-based engine builders, The Rod Shop, sponsoring a series of highly successful drag racecars. In stores, a Rod Shop section was created as kind of a speed shop inside of a parts store. In addition to go fast goodies from all the big names, Nationwise also sold Rod Shop branded performance parts. These parts were typically embossed with NRS (Nationwise Rod Shop), making them easy to identify by collectors, even decades later. The Rod Shop partnership ended in 1987, and less than a decade later, Nationwise became insolvent, and closed all stores on Sunday, October 15, 1995 at 3:00 PM.
Description: More American Graffiti is set over the course of four New Year's Eve holidays beginning in 1964 and tells four separate stories, one of which is that of John Milner, the head honcho of the racing scene in the first film, as his drag racing career advances. John's story follows him and the Milner Racing Team crew through a series of personal and professional ups and downs, culminating in a fatal finale. This Milner Racing Team design is a replica based on a screen used tee, ensuring it's accurate to those seen in the film.
Description: Weber Speed Equipment started out in 1945 as Weber Tool Company, making some of the first aluminum performance fly wheels. As the company continued to expand their speed parts catalog with cams, clutches, and heads, becoming increasingly popular with hot rodders and racers alike, they changed their name to Weber Speed Equipment. Aside from making high quality, extreme high-performance parts, one of their biggest claims to fame was their 'blow up proof' guarantee on their flywheels, something that was a big draw to those pushing higher horsepower and revs in the early days of drag racing.
Description: Great Lakes Dragaway is a quarter mile dragstrip in the Town of Paris, Kenosha County, near Union Grove, Wisconsin. The drag strip opened in 1955, making it the 2nd oldest continuously operating drag strip in the country after Inyokern Airport closed. #1 is Redding Raceway in California, which opened in 1953. In the early days of the track, races were started by a flagman (before drag strip Christmas Trees) and cars sometimes raced four abreast.
Description: This Pennsylvania-based performance legend started out as a maker of motor mounts for engine swaps and floor-shifters back in 1958, but they steadily expanded their product line through the 1960s. Hurst wheels, Line/Loc, and Swifter Shifter gloves were developed among other items, and later, Airheart Brakes and the Schiefer Manufacturing Company, which made clutches and other driveline components, were acquired. Hurst Performance floor-shifters were skillfully engineered, reliable and stirring in appearance, plus, their marketing was in tune with the times, catering to the flourishing muscle car movement of the 1960s. Their shifters infiltrated the drag racing, stock car racing, off-road racing and many other areas of motorsports.
Description: Founded in 1925, Mallory initially developed OEM ignition systems for many early cars, but by the '50s, they were known for their aftermarket systems for hot rods and drag racers who needed more oomph to get their high-compression engines to light and for those needing more adjustability for fine-tuning and keeping their monster motors humming along. Mighty Mallory was a fun superhero inspired character introduced in 1962 and was most commonly found on decals handed out at drag racing events.
Description: When people think of early speed parts manufacturers, they usually think of the Southern California hot rod scene, so Drag Fast Speed Shifters catches them off guard. Based out of Seattle, Washington, Drag Fast handcrafted some of the best shifters around beginning in the late ’50s. Utilizing larger diameter shift rods and the inclusion of adjustable shift stops like a Competition Plus, Drag Fast made top-notch stuff that was built for drag racing.
Description: Speed-O-Motive got their start manufacturing custom pistons for flathead racing engines, but eventually began distributing speed parts and offering high-performance engine rebuild kits for pretty much every V8 application out there. If you couldn't swing by their Los Angeles area shop, you could mail order your parts, even complete engines after they begin offering turn key balanced and blueprinted crate racing engines. These crate strokers all ran Speed-O-Motive racing pistons, and the rest of the build leveraged top shelf goodies from other manufacturers.
Description: "Dyno" Don Nicholson earned his nickname while working at the big Pasadena Chebby dealer, using the dynamometer to tune customer cars. With the aid of his dealer connections, his prowess on the track caught the attention of Bowtie's racing gurus in Detroit, and Nicholson was one of the first to receive a 409 when it debuted in 1961. He put that 409 to good use, winning the Top Stock Eliminator at the first Winternationals in his Bel Air. He repeated that feat in '62, by which time he had been lured to Atlanta to work his tuning magic for Nalley Chebby. Nalley would not ony sponsor his Bel Air, but also set him up with his own dedicated tuning garage, calling it the Nalley-Nicholson Dyno Shop.
Description: Discover how Baldwin Chevrolet, in collaboration with Joel Rosen’s Motion Performance, transformed 1960s–70s Chevys into street-legal drag cars with high-performance crate engines and wild custom body kits—outpacing rivals like Yenko, Nickey, and Royal Pontiac. ### **Baldwin Chevrolet & Motion Performance: Long Island’s Muscle Car Revolution** During the 1960s–70s muscle car era, dealerships like **Yenko**, **Nickey Chevrolet**, **Grand Spaulding Dodge**, and **Royal Pontiac** dominated the “supercar” scene by upgrading stock-bodied vehicles with **tuned factory engines** or **high-performance crate engines**. However, **Baldwin Chevrolet** of **Baldwin, New York (Long Island)** carved a unique legacy by partnering with *
Description: This World War II era airfield was located ten miles north of Green Cove Springs off of U. S. Highway 17 opened up in 1960. Drag races were held on the northern east-west asphalt runway of the Fleming Island Naval Outer Landing Field and was named after the Republic P-47 Thunderbolt aircraft that flew out of the base. The track was back-lit by two big WWII surplus searchlights that would go from idle to full light when the cars staged. Starting was by a liberated traffic light hanging across the track, so no Chrondek type tree here. Races were first every Sunday, but later in 1961, changed to the first and third Sunday.
Description: Among the dealership-based supercar builders of the 1960s and ’70s — including Yenko, Nickey, Grand Spaulding Dodge, and Royal Pontiac, most of these dealerships of the muscle era offered what was known as a 'supercar' service, which essentially provided a brand new, stock-bodied vehicle with plenty of extra horses, using either a highly tuned factory power plant or a high-performance crate engine. Baldwin Chevrolet took a slightly different approach, taking new Chevys sold through is dealership in Baldwin, New York (Long Island), and then delivered them to Joel Rosen’s Motion Performance speed shop (also in Baldwin), where they became street-legal, turn-key drag cars. many of which had optional wild custom body kits
Description: Despite what kit car ads in the back of magazines say, claims of easy assembly and performance are dubious at best. Jim Kellison set out to change that in the late '50s with a grand vision and a beautifully designed car body. Kellison's J-4 was initially offered as a fiberglass coupe ready to be mounted on your choice of chassis. Wanting to deliver a more complete offering, Kellison hired an Indy chassis builder to design a custom box tube frame that was both lighter and stronger than any donor chassis, and could be finished with readily available components. The result was a car that didn't just keep up with the best European models but outperformed them. This design is based on the Kellison 'Springy Thingy' mascot that showed up in 1968.
